Multi Colors Plastic Toys Figurine Injection Molding Machine, 24 Cavities
Vertical injection molding machine for small occupation position, low energy consumption, embedment is widely used, but the clamping force, the machine height is subsequently heighten, especially vertical clamping type vertical injection molding the whole set of machine, factory should not only have the high and should match the corresponding height of workbench, operation is not convenient, also make the production environment is conditioned by many of the machine. linkage clamping vertical injection molding machine series, fundamentally solved this difficult problem, effectively reduce the height of the workbench face and the whole machine, so that every breakthrough because of the interference problem of vertical injection molding machine industry for many years, promote new injection molding industry reform.
Hommar equipment structure: vertical injection molding machine for vertical clamping structure, vertical injection, the double location skateboarding workbench. Machine operation, the two lower die with a mold on the alternate assignments, a forming mold, a mold take put out, greatly facilitate the placement of the filter paper, improve the efficiency by more than 30%, and more job security.
Plastic Toys Figurine Injection Molding Machine can do
Plastic Toys Figurine
Multi colors Toys Figurine
ABS+PVC Toy Figurine
Nylon+TPE Toy Figurine
Features:
| 1 | Make TWO COLORS toy figurine at the same time |
| 2 | Full Automatical,no need labor,can work 7 days,24 hrs |
| 3 | High efficiency,cycle time 24s, 2 cavities |
| 4 | Servo motor equiped, saving power by 60% |
| 5 | One stop purchase ,a whole set Solution |
| 6 | On Site Technical Support and Romate Technical Support |
Technical Parameters:
| Injection Unit |
| Screw Diameter | mm | 42 |
| Screw Stroke | mm | 160 |
| Shot Volume | cm3 | 221 |
| Injection Weight | g/oz | 206/7.3 |
| Plasticizing Capacity | g/s | 22 |
| Max. Injection Pressure | kgf/cm2 | 1428 |
| Injection Rate | cm3/s | 138-110 |
| Injection Speed | mm/s | 100-80 |
| Screw Speed | r.p.m. | 0-250,0-200 |
| Nozzle Force | tf | 2.4 |
| Nozzle Ejection Stroke | mm | 45 or more |
| Clamping Unit |
| Clamping Force | tf | 120 |
| Opening Force | tf | 26 |
| Clamping Stroke | mm | 250 |
| Min. Mold Height | mm | 210 |
| Max. Distance | mm | 460 |
| Distance between Columns | mm | 990*405 |
| Max. Mold Size | mm | 300*250 |
| Platens Size | mm | 1235*650 |
| Ejector Stroke | mm | 65 |
| Ejector Force | tf | 17.2 |
| Qty of ejector | pcs | 1*2 |
| System Pressure | kgf/cm2 | 140 |
| General |
| Oil Tank Cpacity | L | 340 |
| Motor Power | KW | 14+18.5 |
| Heater Power | KW | 4.2*2 |
| Temperature Stage | | 4*2 |
| Working Table Height | mm | 1200 |
| Dimensions |
| Machine Size | mm | 1920*2080*3600 |
| Weight | T | 7.1 |
| Packing Size | mm | 2100*2200*2000+1500*1100*1700 |
| Packing Weight | T | 7.8 |
Key parts List
| Item | Item Name | Brand | Original of Country |
| 1 | PLC | DIHZHOU | TAIWAN |
| 2 | Screw and barrel | HUAYE | CHINA |
| 3 | Electric motor | Universal | CHINA |
| 4 | Seal kit | HALLITE | United Kingdom |
| 5 | Solenoid valves | Yuken | Taiwan |
| 6 | Proporional valves | Yuken | Taiwan |
| 7 | Hydraulic motor | White | United States |
| 8 | Linear Scale | Gefran | Italy |
| 9 | Gear pump | Eckerle | Germany |
| 10 | Electrical Connectors | Schneider | France |
| 11 | Tie bar | Genaral | Taiwan |
| 12 | Heater bands | Schneider | France |
Accessory List
| 1 | Injection Machine | x | 1 |
| 2 | Robot | x | 2 |
| 3 | Mold | x | 2 |
|
Optional Accessories(Charged)
|
| 1 | Water Chiller | x | 1 |
| 2 | Grinder | x | 1 |
| 3 | Blender | x | 1 |
| 4 | Dryer | x | 1 |
| 5 | Loading machine | x | 1 |
| 6 | Honeycomb Dehumidifiers | x | 1 |
| 7 | Mold Temperature Controller | x | 1 |
Price List
| QTY=1 set | 69000-79000 | USD/set | FOB Shenzhen |
| QTY=2-5 set | 2-3% off | USD/set | FOB Shenzhen |
| QTY=6-10 set | 5-7% off | USD/set | FOB Shenzhen |
| More | Negotiable |
After-sales service
QTY=1 PCS,online technical support
QTY=2-4 PCS,our techincians on site but tickets, hotel and food are borne by you and labor fee 100 USD/day/person
QTY=5-6 PCS,techincians on site ,labor free but hotel and food are borne by you.
View video on Youtube
More Details
2 Robots for Plastic Toys Figurine Injection Molding Machine
Customer's Workshop
4 sets of 2 colors Plastic Toys Figurine Injection Molding Machine
Product Tags:
|
|
24 Cavities Multi Color Injection Molding Machine For Plastic Toys Figurine Images
|
